How to build a PropellerAds zone blacklist from your own tracker data
How to build a PropellerAds zone blacklist from your own tracker data
A PropellerAds zone blacklist is a list of zone IDs you exclude from a campaign because your own tracker data shows they lose money. You build it by passing PropellerAds' zone ID into a sub-ID parameter, letting conversions come back by postback, then reading cost and revenue per zone instead of per campaign. The network's own reports tell you what it charged you. Only your tracker can tell you which zones actually converted — and that gap is where your wasted budget lives.
This guide walks through the whole loop: mapping the zone token into Adtraxo, sending conversions back, reading per-zone data, applying a decision rule, and pushing the blacklist back into PropellerAds without breaking the campaign's learning phase. It assumes you already have a campaign running. If you don't, start with How to track native and push ad campaigns: a network-by-network setup guide and come back.
Why you need a zone blacklist at all
PropellerAds buys traffic from thousands of publisher zones — websites, apps, and notification sources. Your campaign targets an audience, a geo, a device type and a bid, but the network decides which zones fill each impression. Some zones send you cheap clicks that never convert. Others send fewer clicks that pay for themselves several times over.
Left alone, the campaign averages those two groups together. You see a blended ROI that looks survivable and never learn that 20% of your spend is going to zones with zero conversions. The zone blacklist is how you stop paying for the average and start paying only for the good half.
Two things make this possible: the zone ID token PropellerAds exposes on every click, and a tracker that stores that token per click and ties conversions back to it. Without both, you're guessing from the network's aggregated report.
Step 1: find the zone token in PropellerAds
In your PropellerAds campaign settings, the tracking URL field accepts macros. The zone identifier is exposed through the zone ID macro, written as {{zone_id}} in the campaign's tracking URL. There are related macros for the campaign, creative and other dimensions, but the zone is the one you need for a blacklist.
PropellerAds also lets you append your own parameters to the tracking URL. That's where your tracker's sub-ID slots come in. The pattern looks like this:
https://yourdomain.com/click?camp=prop_native_01&sub1={{zone_id}}&sub2={{campaign_id}}&sub3={{creative_id}}
Three things matter here:
- Use your own tracking domain. A custom domain keeps the click URL clean and avoids the shared-domain noise that some networks and browsers treat differently. Adtraxo gives you one custom domain on Free and unlimited domains on Pro.
- Keep the mapping consistent. Decide once that sub1 is always the zone and never reuse it for something else in that campaign. If you mix meanings, your per-zone report becomes garbage.
- Don't overload the slots. You have sub1 through sub5 on Adtraxo Pro. Zone, campaign, creative and one spare is usually enough. If you need more dimensions, split the campaign.
For a fuller explanation of how network tokens map onto tracker parameters, see Ad network tracking macros explained: what tokens are and how to map them to sub-IDs.
Step 2: make sure conversions come back by postback
A zone blacklist built on clicks is useless. You need conversions attributed to the same click that carried the zone ID. That means a server-to-server postback from your offer or affiliate network into Adtraxo, matched on the click ID.
The flow is:
- Adtraxo receives the click, stores the zone ID from sub1, and generates a unique click ID.
- You pass that click ID to your offer or affiliate network as its tracking parameter.
- When a conversion fires, the network calls your Adtraxo postback URL with the click ID and the payout.
- Adtraxo records the conversion against that click — and therefore against that zone.
Postback conversion tracking and sub-IDs (sub1–sub5) are Adtraxo Pro features. On the Free plan you get 10 tracking links and 5,000 recorded clicks a month with basic stats, which is fine for learning the platform but not for building a zone-level blacklist, because you need both the sub-ID capture and the postback to attribute revenue per zone.
If you're running Taboola or MGID alongside PropellerAds, the postback mechanics are the same but the token names differ — Taboola conversion tracking for affiliates: sending sales back with a postback and MGID tracking setup: passing widget and teaser IDs into your tracker cover those.
Step 3: read the per-zone report, not the campaign report
Once you have a few days of data with conversions flowing, open the campaign in Adtraxo and break the report down by sub1. That gives you one row per PropellerAds zone, with clicks, conversions, cost and revenue side by side.
What you're looking for is not the zones with the most clicks. It's the zones where the relationship between spend and revenue is clearly negative, with enough volume that you trust the signal. A zone with three clicks and zero conversions tells you nothing. A zone with 400 clicks and zero conversions is a decision.
Three filters worth applying before you cut anything:
- Minimum click volume. Set a floor — for example, don't judge a zone until it has at least a few hundred clicks — so you're not reacting to noise.
- Minimum spend. A zone that has burned a meaningful multiple of your target CPA with no conversions is a stronger cut than one that has burned pocket change.
- Time window. Judge over at least several days. Push traffic has day-of-week and hour-of-day swings; a zone that looks dead on a Sunday may convert on a Tuesday.
Also check the geo and device breakdown inside each zone before you blacklist it wholesale. Sometimes a zone is fine on Android and terrible on iOS, or fine in one country and dead in another. If your campaign covers multiple geos, a zone-level cut throws away the good part. In that case, split the campaign by geo first, then blacklist per campaign.
Step 4: apply a decision rule, not a vibe
The most common mistake is blacklisting on gut feel after a bad morning. Write the rule down before you look at the data, and apply it the same way every time.
A workable rule for a CPA campaign:
- Calculate your target CPA — the maximum you can pay per conversion and still profit.
- Any zone with spend of at least 2× target CPA and zero conversions goes on the blacklist.
- Any zone with spend of at least 3× target CPA and a CPA worse than 1.5× target goes on the blacklist.
- Any zone with a CPA better than target stays, regardless of click volume.
- Zones in between go on a watch list, not the blacklist.
For a revshare offer the maths is different but the principle is identical: replace "target CPA" with the revenue-per-click you need to break even, and judge zones against that. The point is that the threshold comes from your economics, not from how annoyed you are.
Keep a watch list. Zones that are marginal today can become profitable after a bid change or a new creative, and a zone you blacklisted six months ago may be worth retesting. A blacklist is a living document, not a permanent ban.
Step 5: push the blacklist into PropellerAds
PropellerAds lets you exclude zones at the campaign level. There are two practical routes:
- Manual exclusion list. Copy the zone IDs from your Adtraxo sub1 report into the campaign's zone blacklist field in PropellerAds. This is fine for the first pass, when you're cutting maybe a dozen obvious losers.
- Bulk upload. For larger lists, PropellerAds supports uploading a list of zone IDs to exclude. Export your blacklist from the tracker as a plain list of IDs, one per line, and upload it.
Two cautions. First, every edit to a campaign's targeting can reset or disrupt its learning. Batch your cuts — review data weekly, apply one consolidated blacklist update, then leave the campaign alone for several days. Second, keep a copy of the blacklist outside the network. If you ever rebuild the campaign, you want to carry the exclusions over rather than rediscover them.
If you're also running RichAds, the same workflow applies with different token names — see RichAds tracking setup: postbacks and creative IDs for push campaigns.
What to do about zones you can't judge yet
Most of your zones will sit in the middle: some clicks, a conversion or two, a CPA that's neither clearly good nor clearly bad. Don't blacklist them. Instead:
- Let them run longer. Volume accumulates; the picture sharpens.
- Test a new creative against them. A zone that fails on one creative may work on another. Push ad creative testing: how to compare creatives by conversions, not clicks explains how to isolate that variable.
- Adjust the bid for the campaign, not the zone. PropellerAds doesn't let you bid per zone, so if a cluster of zones is marginally unprofitable, a small bid reduction may fix the whole cluster without cutting it.
Adtraxo's AI Campaign Optimizer can flag zones that are statistically likely to keep losing based on their pattern so far, which helps you prioritise which marginal zones to watch first. It doesn't replace the decision rule — it just sorts the queue.
Watch for the click discrepancy trap
Before you blacklist a zone for "no conversions", check that the clicks actually arrived. PropellerAds' click count and your tracker's click count will rarely match exactly — redirects get dropped, bots get filtered, users close the tab mid-redirect. A zone where the network reports 500 clicks and your tracker recorded 300 is a different story from one where both report 500.
Adtraxo's fraud detection (on Pro) flags IP velocity, datacenter IPs, bot user agents, uniqueness conflicts and invalid referers. If a zone is showing up heavily in those flags, blacklist it for fraud rather than for performance — and note why, so you don't retest it in three months. Why your ad network and your tracker show different click counts covers the mechanics of the gap.
You can also add a one-line arrival snippet to your landing page on any Adtraxo plan. It records which clicks actually loaded the page in a real browser, which separates "the click never arrived" from "the click arrived and the user bounced instantly". Those are two very different reasons to blacklist a zone.
How often should you rebuild the blacklist?
Weekly is a sensible rhythm for an active campaign. Daily is too noisy and leads to over-cutting; monthly is too slow and lets waste accumulate. On each weekly pass:
- Export the sub1 report for the last 7 and last 28 days.
- Apply your decision rule to both windows. Zones that fail in both are strong cuts. Zones that fail only in the 7-day window go on the watch list.
- Consolidate new cuts into a single blacklist update.
- Upload to PropellerAds once, then leave the campaign untouched for several days.
- Log the date, the zones cut, and the reason. You'll want it later.
The 28-day view protects you from cutting a zone that had one bad week. The 7-day view catches genuinely dead zones before they burn another week of budget. Using both is the difference between a blacklist that improves ROI and one that just churns.
Related reading in this cluster
If you're running multiple native and push networks, the same per-placement discipline applies elsewhere. How to find and block the Taboola publisher sites that waste your budget covers the publisher-level equivalent, and MGID widget blacklist: how to decide which widgets to cut and when covers widget-level cuts with the same decision-rule approach.
Frequently asked questions
What is a PropellerAds zone blacklist?
It's a list of zone IDs excluded from a PropellerAds campaign because your own tracking data shows they spend budget without producing conversions, or produce them at a CPA worse than your target. You build it from per-zone cost and revenue in your tracker, then upload it to the campaign's exclusion settings.
Which PropellerAds macro gives me the zone ID?
The zone ID macro, written as {{zone_id}} in the campaign's tracking URL. Append it to a sub-ID parameter such as sub1 so your tracker stores it against every click and can attribute conversions back to that zone.
Can I build a zone blacklist on Adtraxo's Free plan?
Not practically. Sub-IDs (sub1–sub5) and postback conversion tracking are Pro features, and you need both to attribute revenue per zone. Free covers 10 tracking links, 5,000 recorded clicks a month, 1 custom domain and basic stats — enough to evaluate the platform, not to run zone-level optimisation.
How much spend should a zone burn before I blacklist it?
Use a multiple of your target CPA rather than a fixed number. A common rule is to cut any zone that has spent at least 2× target CPA with zero conversions, or at least 3× target CPA with a CPA worse than 1.5× target. The thresholds come from your economics, so they'll differ from someone else's campaign.
Should I blacklist a zone permanently?
No. Keep blacklisted zones in a log with the date and reason. Zones change hands, creative quality shifts, and a zone that failed on one offer may work on another. Review the log periodically and retest selectively rather than treating the blacklist as permanent.
Ready to see which PropellerAds zones are actually paying for themselves? Set up a campaign in Adtraxo, map {{zone_id}} to sub1, wire up your postback, and let the per-zone report tell you what to cut. Start at adtraxo.com.
Track your affiliate campaigns for free
Clicks, conversions, fraud detection — all in one tracker.
Get started free →Not ready for an account? Get the Tracking Domination Playbook — free, just your email.