How to track leads and sales as separate conversion events

13 min readUpdated Nov 10, 2026

How to track leads and sales as separate conversion events

If you want to track leads and sales separately, you need two distinct conversion events with two distinct values, fired at two different moments in the funnel. A lead is a form submit, a registration, or a call booking — it has a real cost but no revenue attached yet. A sale is a confirmed purchase with a payout you can bank. Send both into the same "conversion" bucket and every number downstream is wrong: your EPC gets inflated by leads that never buy, your ROI looks better than it is, and you cannot tell whether a campaign with cheap leads is actually a winner or a slow bleed. This article shows the event structure, the postback parameters, and the reporting setup that keeps the two apart.

The whole thing comes down to one field most affiliates never touch: the conversion type. Once you split your events by type and carry the payout value through each one, lead volume and sales revenue stop contaminating each other. Everything below is written for a tracker that supports server-to-server postbacks and sub-ID passing — in Adtraxo that means the Pro plan, where postback conversions and sub1–sub5 are available.

Why tracking leads and sales separately matters more than most affiliates think

Consider two campaigns, both spending the same amount, both producing the same number of "conversions" in a tracker that lumps everything together.

Campaign A produces 100 leads and 4 sales. Campaign B produces 30 leads and 12 sales. If leads and sales both land in one conversion column, the tracker sees 104 versus 42 and tells you Campaign A is the winner. It isn't. Campaign A is generating cheap form fills that mostly go nowhere; Campaign B is generating buyers. A single blended conversion count cannot see the difference, and if you optimise on it you will scale the wrong campaign until the budget runs out.

There is a second, quieter problem: value. A lead has a cost (your CPC times clicks) but no revenue until it converts. If you assign leads a fake value to make the tracker "show something", your ROI becomes fiction. If you assign them zero, a lead-only campaign shows a 100% loss, which is also wrong — the lead is an asset with a future payout you have not received yet. The honest approach is to record leads as a separate event with zero or a clearly labelled estimated value, and record sales with the real payout. Then you read two metrics side by side: cost per lead, and revenue per sale.

There is a third reason, and it is the one that bites people in disputes: conversion types are how your affiliate network and your tracker agree on what happened. If the network reports "leads: 100, sales: 4" and your tracker reports "conversions: 104, revenue: $X", reconciliation becomes guesswork. When both sides speak in the same two event types, the numbers line up or they don't — and you can see which. That is the subject of why your affiliate network and your tracker report different conversions.

What is the difference between a lead conversion and a sale conversion?

A lead conversion is a completed action that identifies a prospect but does not yet produce revenue you can collect — an email opt-in, a free trial signup, a quote request, a booked call. A sale conversion is a transaction that generates a payout or commission — a paid order, a confirmed subscription, a completed purchase.

The distinction matters because the two events differ in four practical ways:

  1. Timing. Leads fire immediately after the form submit. Sales often fire hours or days later, sometimes after manual approval or a refund window. Your tracker must accept a postback that arrives late and still attribute it to the original click.
  2. Value. A lead's value is either zero or an estimate. A sale's value is the actual payout the network will pay you. Never put an estimate in the sale field.
  3. Volume. Leads will outnumber sales by a wide margin. Mixing them makes your conversion rate meaningless — a 40% "conversion rate" that is 90% leads tells you nothing about whether the offer sells.
  4. Optimisation signal. Ad platforms and your own decisions should optimise on the event that pays. If you optimise on lead volume, you will attract traffic that fills forms cheaply and never buys.

If your network only pays on the sale, you still want the lead event recorded — it tells you where in the funnel people drop off, and it lets you compare traffic sources on cost per lead even when sale volume is too low to be statistically useful.

Set up two conversion types in your tracker, in order

This is the core configuration. The exact labels differ between tools, but the logic is universal. In Adtraxo you create both events under the campaign's conversion settings, each with its own postback URL.

  1. Create the lead event first. Name it something unambiguous — lead, not "conversion". Set its value to zero, or to a fixed estimated value if you genuinely know your lead-to-sale rate and want a projected figure (label it as an estimate in your own notes, because the tracker will treat it as revenue).
  2. Create the sale event second. Name it sale. Set its value to be passed dynamically from the network via a payout parameter, not hard-coded. A hard-coded $20 sale value is wrong the moment the offer has tiered payouts or you run two offers in one campaign.
  3. Generate a separate postback URL for each event. Each URL carries the click ID placeholder and, for the sale event, the payout placeholder. Keep them in a text file — you will paste them into the network twice.
  4. Paste the lead postback into the network's lead/conversion field and the sale postback into the sale/purchase field. Many networks have exactly these two slots; some have a generic "conversion" slot plus a separate "sale" or "upsell" slot. Match them by meaning, not by position.
  5. Pass the payout on the sale event only. The lead event should not carry a payout parameter unless the network genuinely pays for leads.
  6. Confirm the click ID parameter name matches. If the network calls it clickid and your postback expects subid, nothing will match. This is covered in detail in what is a click ID, and why conversions go missing without one.

A typical Adtraxo postback for a sale looks like this — the click ID placeholder is filled by the network, and the payout is passed through:

https://yourdomain.com/postback?cid={clickid}&event=sale&payout={payout}

And the lead event, with no payout:

https://yourdomain.com/postback?cid={clickid}&event=lead

The exact placeholder tokens depend on your network — some use {click_id}, {sub1}, or #clickid#. Always copy the token names from the network's postback documentation rather than assuming. If you are unsure which mechanism to use at all, postback URL vs tracking pixel — which should an affiliate use? explains why server-to-server wins for both events.

How to pass payout values so the sale event carries real revenue

The sale event is only useful if it carries the actual amount you will be paid. There are three ways networks expose this, and you need to know which one yours uses:

  1. A payout macro in the postback. The network substitutes the real commission into a token like {payout} or {commission}. This is the cleanest option — your tracker receives the true figure per conversion, including tiered or product-specific payouts.
  2. A fixed value per offer. If the network does not expose a macro, set the sale value manually in the tracker to the offer's known payout. This works for flat-rate offers but breaks on tiered ones — you will need one campaign per payout tier, or accept approximate revenue.
  3. A revenue parameter appended to the postback by you. Some networks let you append your own &revenue= value when generating the postback. Same limitation as option two.

Whatever the mechanism, the rule is the same: the sale event carries the real payout, the lead event carries none. If you are setting this up for the first time, how to pass payout values in a postback so your ROI numbers are real walks through the token syntax and the common mistakes.

One more point on values: if you do assign a projected value to leads, do it deliberately and consistently. A lead worth an estimated $2 because you historically convert 10% of leads at a $20 payout is a defensible planning number. The same $2 entered casually to make the dashboard look busy is not.

Which conversion type should you optimise on?

Optimise on the event that pays, but use the other event to diagnose.

In practice that means:

  • Judge campaigns on sale revenue and sale count once you have enough sale volume to be meaningful. Early on, sale counts are too small and noisy to act on, so use cost per lead as a leading indicator — but never confuse it with profit.
  • Compare sources on lead-to-sale rate. Two sources with identical cost per lead can have wildly different sale rates. The one with the higher lead-to-sale rate is the one to scale, even if its leads cost more.
  • Watch for lead-only sources. A source that produces leads at a great price and almost no sales is either sending low-intent traffic or the sale postback is broken. Before you cut it, verify the sale event is firing at all — see postback not firing: the checks to run, in order.

In Adtraxo, both events appear in the per-campaign analytics with geo and device breakdowns, so you can see, for example, that mobile leads convert to sales at half the rate of desktop leads on the same source. That is the kind of split a blended conversion count hides completely. If you are running the AI Campaign Optimizer, point it at the sale event as the objective — otherwise it will happily optimise toward cheap leads.

Test both events before you spend a cent

Two events means two things that can break independently. Test them in this order:

  1. Fire a test lead. Submit the form yourself (or use the network's test conversion tool if it has one). Confirm the lead appears in your tracker's conversion log with the correct click ID and zero revenue.
  2. Fire a test sale. Trigger the sale event the same way. Confirm it appears as a separate event type, attributed to the same click ID, with the correct payout value.
  3. Check the totals. Your tracker should show 1 lead and 1 sale — not 2 conversions of the same type. If both landed as the same event, your postback URLs are pointing at the same event or the network is sending both to one slot.
  4. Check the value. The sale event should show the real payout. If it shows zero, the payout macro is wrong or the parameter name does not match.
  5. Check the attribution window. If your network fires sales days after the click, confirm a delayed postback still attributes to the original click rather than creating an orphan conversion.

Do this on a $5 test budget or with the network's built-in test tool before scaling. The full sequence, including how to read the tracker's raw postback log, is in how to test a postback URL before you send paid traffic. If a test conversion never appears at all, work through affiliate conversions not tracking? A step-by-step troubleshooting guide.

Use sub-IDs to see which placement, creative or email produced the lead — and which produced the sale

Splitting events by type tells you what happened. Sub-IDs tell you where it came from. Pass a different sub-ID value per placement, creative, or traffic source, and both your lead and sale events will inherit it — so you can see that placement A produced 40 leads and 0 sales while placement B produced 8 leads and 3 sales.

In Adtraxo, sub1–sub5 are available on Pro and pass through to the network and back on the postback. The pattern that works well:

  • sub1 — traffic source or campaign ID
  • sub2 — placement or zone
  • sub3 — creative or ad ID
  • sub4 — landing page variant (useful alongside A/B split testing)
  • sub5 — anything else, such as an email sequence step

If you are running affiliate links inside an email follow-up sequence, sub5 as the sequence step lets you see which email generated the lead and which one generated the sale — they are frequently not the same email. That is covered in how to track which email in your follow-up sequence drives affiliate sales.

One caution: do not try to solve attribution with UTM parameters alone. UTMs are read by analytics tools on the landing page, not reliably passed back on a server-to-server postback. Sub-IDs are the mechanism that survives the round trip. The trade-offs are laid out in UTM parameters vs sub-IDs — which should you use on affiliate links?

Read the two events together, not separately

The point of separating leads and sales is not to have two dashboards. It is to compute the numbers that only exist when both events are clean:

  • Cost per lead = spend ÷ leads. Tells you how efficiently you are filling the top of the funnel.
  • Lead-to-sale rate = sales ÷ leads. Tells you how good the traffic and the offer are together.
  • Cost per sale = spend ÷ sales. The number that decides whether the campaign is profitable.
  • Revenue per sale = total revenue ÷ sales. Confirms your payout values are arriving correctly — if this drifts from the offer's stated payout, a macro is broken.

When cost per sale is below revenue per sale, you have a business. When it is above, you have a lead-generation hobby. The separation is what lets you see which of the two you are running, and where in the funnel to fix it.

Frequently asked questions

Can I track leads and sales as separate events on the Adtraxo Free plan?

No. Postback conversion tracking and sub-IDs (sub1–sub5) are Pro features. The Free plan covers 10 tracking links, 5,000 recorded clicks a month, 1 custom domain, and basic stats with no card required. Pro at $27/month (founding rate, rising to $47 for new accounts) adds unlimited links, clicks and domains, fraud detection and rules, A/B split testing, sub-IDs, country analytics and S2S postback conversions, with a 30-day money-back guarantee.

What should the lead event's value be if the network does not pay for leads?

Either zero or a clearly labelled estimate. Zero is the honest default: the lead has cost you money but produced no revenue yet. An estimate is acceptable for planning if you calculate it from your own historical lead-to-sale rate and average payout, but remember the tracker will treat it as revenue, so your ROI will be projected rather than realised. Never enter an estimate in the sale event.

Why do both my lead and sale conversions show up as the same event type?

Almost always because both postback URLs point at the same event in your tracker, or because the network sends both actions to a single conversion slot. Check that you generated two separate postback URLs — one per event — and that each is pasted into the correct field in the network's interface. Then fire a test of each and confirm the tracker logs them as

Track your affiliate campaigns for free

Clicks, conversions, fraud detection — all in one tracker.

Get started free →

Not ready for an account? Get the Tracking Domination Playbook — free, just your email.